WarezOmen DDLSpot
UploadGIG.com Premium

«

»

Aug 14 2020

Xilinx MicroBlaze Board Support Packages 2020.1 x64 (Linux)

Xilinx MicroBlaze Board Support Packages 2020.1 x64 (Linux)

Xilinx MicroBlaze Board Support Packages 2020.1 x64 (Linux) | 1.7 GB | Language: English

Xilinx, Inc., the leader in adaptive and intelligent computing, is pleased to announce the availability of MicroBlaze Board Support Packages 2020.1 is a collection of libraries and drivers that will form the lowest layer of your application software stack.

Board Support Package (BSP) is the collective term referring to all of the software components required to match a given operating system (and its environment) to a given hardware design (board). BSPs commonly contain low-level operating system and device driver code that is dependent on the hardware and upon which the rest of the operating system layers. In addition, a BSP might also contain other files containing directives, compilation parameters, and hardware parameters that are used to configure the operating system. Since a given Xilinx hardware platform is configurable, fixed board support packages are not possible. Therefore, a custom board support package must be generated for each hardware design that you create.

SDK can be used to create board support packages for third-party operating systems that are supported on the Xilinx processors. The board support package appears as a project in the SDK Navigator view. You can configure each BSP project in various ways and then run a BSP generation process. The BSP generation process typically ends with a collection of files generated in the workspace, which you must then take into the third-party environment to proceed with building the operating system and applications. The specifics of what files must be collected and how they must be used depends on the third-party operating system in question.

Board Support Package Overview
Xilinx is the inventor of the FPGA, programmable SoCs, and now, the ACAP. Our highly-flexible programmable silicon, enabled by a suite of advanced software and tools, drives rapid innovation across a wide span of industries and technologies – from consumer to cars to the cloud. Xilinx delivers the most dynamic processing technology in the industry, enabling rapid innovation with its adaptable, intelligent computing.

Product: Xilinx MicroBlaze Board Support Packages
Version: 2020.1 *
Supported Architectures: x64
Website Home Page : http://www.xilinx.com
Language: english
System Requirements: Linux **
Size: 1.7 Gb

BSPs supported for the 2020.1 PetaLinux Release. Below contains list supported BSPs for MicroBlaze included in this release
xilinx-ac701-axi-full-v2020.1-final.bsp
This BSP contains two BSPs [AC701 lite, AC701 full]
– Hardware (AC701 lite): Design contains MicroBlaze Processor, core peripherals UART_lite, Ethernet Lite, AXI I2C, AXI GPIO, AXI DDR controller, SPI flash, led_4bits.
– AC701 lite contains the AXI Lite IPs UART_lite, Ethernet Lite etc. in contrast to AC701 Full
– Hardware (AC701 full): Design contains MicroBlaze Processor, core peripherals AXI UART16550, AXI 1G/2.5G Ethernet, AXI I2C, AXI GPIO, AXI DDR controller, SPI flash, led_4bits.
– Software: fs-boot, u-boot, Linux, device-tree, rootfs (minimal packages).
– Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
xilinx-kc705-axi-full-v2020.1-final.bsp
This BSP contains two BSPs [KC705 lite, KC705 full]
– Hardware (KC705 lite): Design contains MicroBlaze Processor, core peripherals UART_lite, Ethernet Lite, AXI I2C, AXI GPIO, AXI DDR controller, Linear flash,led_8bits.
– Hardware (KC705 full): Design contains MicroBlaze Processor, core peripherals AXI UART16550, AXI 1G/2.5G Ethernet, AXI I2C, AXI GPIO, AXI DDR controller, Linear flash,led_8bits.
– Software: fs-boot, u-boot, Linux, device-tree, rootfs (minimal packages).
– Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
xilinx-kcu105-axi-full-v2020.1-final.bsp
This BSP contains:
– Hardware: Design contains MicroBlaze Processor, core peripherals AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI Ethernet IP.
– Software: fs-boot, U-boot, Linux, device-tree, rootfs (minimal packages).
– Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
xilinx-sp701-v2020.1-final.bsp
This BSP contains:
– Hardware: Design contains MicroBlaze Processor, core peripherals AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI Ethernet IP.
– Software: fs-boot, U-boot, Linux, device-tree, rootfs (minimal packages).
– Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.
xilinx-vcu118-v2020.1-final.bsp
This BSP contains:
– Hardware: Design contains MicroBlaze Processor, core peripherals AXI I2C, AXI GPIO, AXI DDR controller, AXI QSPI, led_8bits, and AXI Ethernet IP.
– Software: fs-boot, U-boot, Linux, device-tree, rootfs (minimal packages).
– Pre-built Images: Ready to test images bitstream, fs-boot, u-boot, Linux and rootfs for booting u-boot and Linux.

Installation Requirements:
The PetaLinux Tools Installation requirements are:
Minimum workstation requirements:
– 8 GB RAM (recommended minimum for Xilinx tools)
– 2 GHz CPU clock or equivalent (minimum of 8 cores)
– 100 GB free HDD space
Supported OS:
– Red Hat Enterprise Workstation/Server 7.4, 7.5, 7.6 (64-bit)
– CentOS Workstation/Server 7.4, 7.5, 7.6 (64-bit)
– Ubuntu Linux Workstation/Server 16.04.5, 16.04.6, 18.04.1,18.04.02 (64-bit)

Leave a Reply